Round Bars

A wide range of Copper Round Bar is manufactured and supplied by us. Made of high graded copper alloys these bars are available in several diameters, sizes and varieties and not hollow inside. These rods are exclusively used in many industrial areas due to the extensive features of durability, sustainable property to heat & corrosion and robustness.

Specifications:

• Material: Red Copper
• Width: 20 mm to 600 mm
• Thickness: 0.5~12 mm

Specification : EN, DIN, JIS, ASTM, BS, ASME, AISI

• Standard Specification : ASTM A276, ASTM A479, ASTM A182
• SS 317 Round Bars : Outside Diameter in the range of 4mm to 500mm
• SS 317 Bright Bars : Outside Diameter in the range of 4mm to 200mm
• SS 317 Hex Bars : 4mm – 101.6mm
• SS 317 Square Bars : 3mm – 100mm
• SS 317 Flat Bars : 1 / 2” to 10” in thickness range of 1.6mm to 150mm, Custom Size Stainless Steel Flats available
• Finish : Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
• Length : 1 to 6 Meters, Custom Cut Lengths
• Form : Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc

• Material: Phosphor Bronze
• Width: 3 mm to 160 mm
• Thickness: 0.5 mm to 10 mm

• Shape: Round
• Standard: ASTM / ASME SB 164
• Grades: Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500)

• Hardness: Up to 300 °C / 572°F
• Yield strength: Up to 1100-1300 MPa (160-190 ksi)
• Temperature tolerance: 300 °C (572°F)
• Corrosion resistance: Grade 304 or 430

• Standard:ASTM / ASME SA 276 UNS NO. S 31803, S 32205, S 32550, S 32750, S 32760.
• Surface Treatment: Polished
• Length: 2 m, 3 m, 5.8 m, 6 m, 8 m or as Required.

• We can give superior surface finish and straightness tolerance for Pump Shaft Quality by additional processes such as straightening, roller burnishing, and centre less grinding. Bars can be packed in wooden boxes, with each bar protected with plastic rings to avoid bending and scratches.

One of the preferred option for Metal Alloy Round Bar chosen by almost all industries is 440C bars. These products are capable to sustain the hardness, toughness, and strength and resistance power after heat treatment given for a long time. Due to the presence of carbon content at a greater extent in these products, they exhibit excellent mechanical characteristics and are well suited for the applications as ball bearings and valve parts. The main and single difference between 440A & 440B is in the amount of carbon content (0.60 - 0.75% and 0.75 - 0.95% respectively), the latter have lower attainable hardness but higher corrosion resistance. Although all three versions of this grade are standard grades, in practice 440C is more available than the A or B variants.

Specifications:

• Material: Alloy
• Diameter: 0.5-10 mm
• Length: 400-1000 mm

• Thickness: Dia 5 mm-200 mm
• Standard: GB / T 2965-1996 ASTM B-348, ASTM F 136
• Grades: GR 1, GR -2, GR-3, GR-4, GR-5

• Material: Nickel
• Standard: ASTM / ASME SB 160
• Grades: UNS 2200 ( NICKEL 200 ) / UNS 2201 (NICKEL 201

• Mmachined components, pump shafts, valves, fasteners, machine tools, dairy equipments, surgical & medical parts, threaded bars, studs, bolts, pins, hinges and handles.

• We can give chamfering of 30 or 45 degrees on one or both the ends with our dedicated chamfering machine. For strain-hardened bars, we can supply in b8(304) and b8m(316) in class1 and class2.

• Standard: ASTM / ASME SB 574
• Size range: 3.17mm to 350mm diameter
• Grades:Hastelloy C276 (UNS No. N10276),